Betamotor ALP4T 125 cc 2006 Mode D'emploi page 133

B
A
133
FORK OIL
Right-hand rods
The procedure for changing the oil in the
forks is provided only for information. We
recommend having the operation per-
formed by a BETAMOTOR authorized
workshop.
Follow these steps to renew the oil:
1) Loosen rod clamping screw A.
2) Remove the lower plug (Allen screw
in the legging) and upper plug B.
3) Let all the oil drain from the rod.
4) Fit and tighten the legging lower plug.
5) Pour in fresh oil of the type shown in
the table on page 123.
6) Fit and tighten upper plug B.
7) Retighten rod clamping screw A.
Note: The oil change procedure applies
to both the left and the right fork legs.
3
GB