Connecting Optional Bluetooth® Adapter; Using A Usb Cable To Connect To A Computer; Connecting To The Network Through The Lan Interface; Connecting Using Lan Cable - Pioneer ELITE N-50 Mode D'emploi

Connections
Connecting optional Bluetooth®
adapter
®
Connect the Bluetooth adapter (Pioneer Model No.
AS-BT200) to ADAPTER PORT terminal on the rear
panel.
Important
• Do not move the unit with the Bluetooth ADAPTER
connected. Doing so could cause damage or faulty
contact.
®
Bluetooth adapter (commercially available)
AL OUT DIGITAL IN ADAPTER PORT
(OUTPUT 5V
2 1
0.1A MAX)
COAXIAL OPTICAL COAXIAL
DC OUTPUT DIGITAL IN
for WIRELESS LAN
(OUTPUT 5V
0.6A MAX)
USB
• For instructions on playing the Bluetooth wireless
technology device, see Bluetooth® Audio playback
(optional) on page 13.
Using a USB cable to connect to a
computer
N-50 only:
By using a USB cable (sold separately) to connect this
unit's DIGITAL IN USB port to the USB port on a
computer, this unit can be used as a D/A converter.
For details regarding the output of signals input to the
DIGITAL IN USB port, see section Playing music from a
computer on page 18.
Important
• When using this connection to input audio files
from a computer to this unit, it may be necessary to
install a special driver on the computer. For details,
see the website of Pioneer.
AC IN
USB
USB cable
A-type (commercially available)
AL OUT DIGITAL IN ADAPTER PORT
2 1 (OUTPUT 5V
0.1A MAX)
COAXIAL OPTICAL COAXIAL
DC OUTPUT DIGITAL IN
for WIRELESS LAN
(OUTPUT 5V
0.6A MAX)
USB
B-type
Note
• This unit cannot be used to play audio files from a
computer unless Media Player is installed on the
connected computer.
Connecting to the network through
the LAN interface
By connecting this unit to the network via the LAN
interface, you can play back audio files stored on
components on the network, including your PC, and
listen to Internet radio stations.
Connect the LAN terminal on this unit to the LAN
terminal on your router (with or without the built-in
DHCP server function) with a straight LAN cable (CAT 5
or higher).
Turn on the DHCP server function of your router. If your
router does not have a built-in DHCP server function, you
have to set up the network manually. For details, see
page 19.
Note
• In order to connect to the Internet, you must
conclude a contract with an Internet Service
Provider (ISP).
PC
• To listen to Internet radio stations, you must sign a
contract with an ISP (Internet Service Provider)
beforehand.
• Photo or video files cannot be played back.
• With Windows Media Player 11or 12, you can even
play back copyrighted audio files on this unit.
AC IN

Connecting using LAN cable

Internet
Modem
Router
LAN
LAN cable
3 2 1 WAN
(commercially
available)
PC1 PC2
DIGITAL OUT DIGITAL IN ADAPTER PORT
2 1 (OUTPUT 5V
0.1A MAX)
OPTICAL COAXIAL OPTICAL COAXIAL
LAN (10/100) DC OUTPUT DIGITAL IN
for WIRELESS LAN
(OUTPUT 5V
0.6A MAX)
USB
02
7
En