Part Names And Functions; Remote Control - Pioneer ELITE N-50 Mode D'emploi

Part names and functions

Chapter 3:
Part names and functions

Remote control

STANDBY/ON DISPLAY
1 12
INTERNET MUSIC
iPod RADIO SERVER
USB Bluetooth Air Jam
2
DIG IN USB DIG IN 1 DIG IN 2
1 2 3
4 5 6
3
7 8 9
4
CLEAR 0 ENTER
13
5
14
6

 
SHUFFLE REPEAT
15
7

16
8
SETUP SOUND
9 17
ENTER
HOME MENU RETURN
10 18
PURE AUDIO Hi-Bit 32
11
19
NETWORK AUDIO PLAYER
 STANDBY/ON
1
This button operates when the unit's main /I
STANDBY/ON button is set to ON. Each time this button
is pressed, the unit's status alternates between ON and
STANDBY modes.
2 Function buttons
Use to change the input source.
• DIG IN 1, DIG IN 2 and DIG IN USB functions are
supported only by the N-50.
3 Number buttons (0 to 9)
These are used to input numbers for network and other
settings.
4 CLEAR
Press to clear the selected item.
Use this for example if you input the wrong number.
5 
Press to start playback. During playback, pause/
unpause playback.

6
Press to return to the beginning of the currently playing
file.
• Depending on the input function selected, it may
not be possible to return to the beginning of the
currently playing file.
7 SHUFFLE
Perform shuffle play of files on the selected iPod/iPhone/
iPad, USB storage device or Music Server (page 11, 12,
17).
///
8
Use these to select items, change settings and
move the cursor.
ENTER
Use this to implement the selected item or enter a
setting that you have changed.
9 SETUP
Use this to change the settings such as Display Setting
(page 19), Network Setting (page 19), Option Setting
(page 20) and see System Info (page 19).
This button is also used to reinitialize unit settings as
described in the section Reset (page 20).
10 HOME MENU
Select and play the file from the menu screen.
11 PURE AUDIO (N-50 only)
Press this button to activate the PURE AUDIO mode. In
this mode, audio playback is performed with greatest
fidelity to the original sounds (page 18).
12 DISPLAY
Press to turn the display off when you do not need it.
When an action is performed on the unit, the display will
automatically light, then turn off again after ten seconds.
Press the button once again to cancel the Display OFF
mode.
13 ENTER
Press to enter the selected item.
14 
Press during playback to skip ahead to the beginning of
the next file.
15 REPEAT
Perform repeat play of files on the selected iPod/iPhone/
iPad, USB storage device or Music Server (page 11, 12,
17).
16 
Press to stop playback.
17 SOUND (N-50 only)
Turns Auto Sound Retriever, Auto Level Control,
Hi-Bit 32 and Sound Retriever Air on and off (page 18).
• Sound Retriever Air can be set only when the
Bluetooth or Air Jam functions have been
selected.
18 RETURN
Press to return to the previous screen. Also, use to
cancel the sound setting.
19 Hi-Bit 32 (N-50 only)
Press this button to turn on the SOUND mode's
Hi-Bit 32 function. This expands the dynamic range (and
frequency direction band) for digital audio signals,
producing smoother and more detailed playback
(page 18).
03
9
En