Friendly Name; Parental Lock Setup; Turn On/Off The Parental Lock; Changing The Password - Pioneer ELITE N-50 Mode D'emploi

09 Changing the settings
Proxy Setup
Select Use Proxy Server when you connect this
unit to the Internet via a proxy server. Enter the IP
address of your proxy server in the Proxy Server
Address field. Also, enter the port number of your
proxy server in the 'Proxy Port' field.

Friendly Name

1 Press SETUP.

2 Select Network Setting Friendly
Name.
Use /// to enter Friendly Name,
3
then press ENTER.
• / : Moves the adjusting digit.
• / : Changes displayed character.
• SOUND : Switches character types.
• CLEAR : Deletes one characters at a time.

Parental lock setup

Restrict internet radio access for children. When
Internet Parental Lock is set to On, you cannot listen to
internet radio without entering the password.
Note
• Even if Internet Parental Lock is set to On,
automatic clock adjustment using network will
work.

Turn on/off the parental lock

1 Press SETUP.
The Initial Setup screen is displayed on the main
display.
Select Option Setting  Internet
2
Parental Lock  Internet Parental Lock.
Use /// or number buttons to
3
enter the password, then press ENTER.
• / : Moves the adjusting digit.
• / : Increase or decreases the numbers.
• CLEAR : Deletes one characters at a time.
• The factory default setting is "0000".
20
En
Use / to select On or Off, then press
4
ENTER.

Changing the password

1 Press SETUP.
The Initial Setup screen is displayed on the main
display.
Select Option Setting  Internet
2
Parental Lock  Change Password.
Use /// or number buttons to
3
enter the current password, then press
ENTER.
Use /// or number buttons to
4
enter the new password, then press ENTER.
• If you press RETURN, the previous screen will be
displayed.

Software Update

Use this procedure to update the unit's software. You
can update the software via a USB storage device.
Updating via a USB storage device is performed by
downloading the update file from a computer, reading
this file onto a USB storage device then inserting the
USB storage device into the USB port on the unit's front
panel.
• If an update file is provided on the Pioneer website,
download it onto your computer. When
downloading an update file from the Pioneer
website onto your computer, the file will be in ZIP
format. Unzip the ZIP file before saving it on the
USB storage device. If there are any files or folders
on the USB storage device, delete them.
Important
• DO NOT unplug the power cord during updating.
• When updating via a USB storage device, do not
disconnect the USB storage device.
1 Press SETUP.
The Initial Setup screen is displayed on the main
display.
Select Option Setting  Software
2
Update  Start, then press ENTER.
Software Update
Start
Cancel
3 To update, press ENTER.
The display will temporarily disappear, and after about
twenty seconds, the update menu will be displayed and
update will begin.
• When the update is completed, the unit will
automatically reboot.

Software Update error messages

Status
Descriptions
messages
No update file was found on the USB
File Not
storage device. Store the file in the USB
Found.
storage device's root directory.

Power Off settings

Make settings to control the power ON/OFF mode.
Changing the Auto Power Off function
setting
The factory default setting for the Auto Power Off
function is On. As a result, when no action is performed
for thirty minutes, the unit will automatically turn Off.
This setting can be changed as follows:
1 Press SETUP.
The Initial Setup screen is displayed on the display.
Select Option Setting  Power Off
2
Setting  Auto Power Off.
Use / to select On or Off.
3

Changing the Quick Start Mode

When this is set to On, the time required for bootup will
be shortened. In addition, power-on will occur
simultaneously when AirPlay or DMR is performed. The
unit's factory default setting for this mode is Off, to
reduce electrical consumption in the STANDBY mode.
1 Press SETUP.
The Initial Setup screen is displayed on the display.
Select Option Setting  Power Off
2
Setting  Quick Start Mode.
Use / to select On or Off.
3

Resetting the system

Use this procedure to reset all system settings to the
factory default.
Important
• Disconnect all components connected to this unit
before the operation.
1 Press SETUP.
The Initial Setup screen is displayed on the display.
2 Select Reset from the Initial Setup
screen, then press ENTER.
The display shows Reset?.
3 To reset settings, press SETUP.
The unit turns off (standby mode).
All the settings will be reset to the factory default next
time the unit is turned on.