Friedrich DWC1 Manuel D'installation Et D'utilisation page 44

Thermostat programmable
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Owner's instruction
Please move to 'AM/PM' setup part
10
of turning off by using
- AM/PM setup is identical with
turning on time setup.
Please move to 'hour' setup part
11
of turning off by using Right
button.
- It is the part to reserve the time
at which air-conditioner is
turned off.
- If 'hour' indication blinks, please
setup 'hour'.
❈ Please setup 'hour' and 'minute'
identically with the method to
setup turning on time.
If finishing weekly reservation setup, please press setup/cancellation button.
12
Weekly reservation setup for the day that you set is finished.
If you setup with the method identical with above by selecting the day that
13
you'd like to setup, it operates weekly reservation.
Weekly reservation explanation
Reservation
number
❈ Indoor unit is turned on to desired temperature if it is configured using up/down button during preset of weekly
operation time. (Temperature selection range : 64°F~86°F)
- When desired temperature is not set, it is turned on automatically with desired temperature of previous operation.
❈ To cancel all weekly timers,
-Pressing set/cancel button while "weekday" display is blinking will cancel the timer.
❈ To cancel the corresponding set individual day of the week,
- After selecting the corresponding day of the week, set the ON timer time to be the same as OFF timer time,
and pressing set/cancel button will cancel the timer.
44 DWC1 Programmable Thermostat
button.
Turning on time
Under bar: the indication that there is weekly reservation for
corresponding day
Turning off time

Publicité

Table des Matières
loading

Table des Matières