Function Setting - Zone Control - Friedrich DWC1 Manuel D'installation Et D'utilisation

Function setting - Zone Control

To turn on/off the zones by used of it
Repeat pressing
1
icon flash.
Ex) Turn on the zone 1 and zone 3.
Press button to select the zone
2
that which one you want to turn on/off.
Press button to turn on/off zone.
3
Press button To select other
4
zones If you want.
Then, Press
zone as mentioned above
Press button to exit or
5
system will automatically release
without any input after 25
seconds.
❈ When exiting without pressing
set button, the manipulated
value is not reflected.
Owner's & Installation Manual 33
Owner's instruction
button until
button to turn on/off that