Function Setting - Change Temp - Friedrich DWC1 Manuel D'installation Et D'utilisation

Owner's instruction

Function Setting - Change Temp

Change temperature is the function to setup air-cooling and heating drive automatically changeable
according to the temperature at artificial intelligence drive mode.
32 DWC1 Programmable Thermostat
Repeat pressing
1
icon flash.
Press button to change.
2
❈ Converting temp value : 1~7
Press button to complete
3
and active the setting process.
Press button to exit or
4
system will automatically release
without any input after 25
seconds.
❈ When exiting without pressing
set button, the manipulated
value is not reflected.
button until