Standard Operation - Surge Cooling; Standard Operation - Heating Mode - Friedrich DWC1 Manuel D'installation Et D'utilisation

Standard Operation - Surge Cooling

What is Surge Cooling?
• Desired temperature: Po (actually 64 °F)
• Wind flow: power wind
• Wind direction: fix to air-cooling position
❈ Partial product has no power air-cooling function.

Standard Operation - Heating Mode

It supplies warm wind to the indoor
•
Heating drive only operates at the cooling and heating model.
•
Heating doesn't operate at cooling exclusive model.
Press button to turn on the
1
indoor.
Press button to select
2
cooling operation mode.
Press button continuously
3
until 'Po' displayed.
It make room temperature
drop fast by running
Press button to turn on the
1
indoor.
Press button to select
2
Heating mode.
(To check the indoor temperature,
press the room temperature button.)
Adjust the desired temperature
3
by pressing
When setting the desired
temperature lower than room
temperature, there is only
ventilation wind.
Owner's & Installation Manual 23
Owner's instruction
buttons.