Galileo And Smarttrak (Pc Interface); Introduction To Smarttrak - Uwatec Galileo luna Mode D'emploi

4. Galileo and SmarttraK (Pc interface)

4. GaLiLeo and SMarttraK (Pc interface)
4.1

Introduction to SmartTRAK

SmartTRAK is the software that allows Galileo to communicate with a Windows-based
PC. For more information on other platforms (Macintosh, Palm, PocketPC) please visit
www.scubapro.com.
SmartTRAK serves five purposes:
- Changing settings: all the settings described in Chapter 2 can be set directly from the PC.
- Downloading dive profiles and organizing the logbook on the PC.
- Uploading pictures to Galileo.
- Uploading languages.
- Updating or upgrading the firmware on the computer.
In order to take advantage of any of these features, you need to establish an infrared
communication between your PC and Galileo.
To start the communication:
- launch SmartTRAK on your PC
- turn on Galileo
- place the infrared interface in line of sight of the infrared window on Galileo.
Galileo will show the symbol
62
on the display once the communication is in place.