Entering Decompression; Dive Time And Turn-Around Time - Uwatec Galileo luna Mode D'emploi

2. Menus, settings and functions

2.6.4 Entering decompression

(default: OFF)
Galileo can activate a warning when the first
mandatory decompression stop appears.
This alerts the diver to the fact that a direct
ascent to the surface is no longer possible.
This warning applies to dives with the
computer set to L0 only.
During the dive, if you are about to enter
decompression and the warning is set to
either ViSuaL or BotH, Galileo will show
the message enterinG deco on the
display for 12 seconds. The following figures
show the actual display in the cLaSSic
and fuLL configurations. If Galileo was
set to LiGHt, at this point it switches to
cLaSSic to fit all the information.
26

2.6.5 Dive time and turn-around time

(default: OFF)
With Galileo you can set a given dive time
in 5 minute increments. At half of the set
value, Galileo will give you a "turn around"
warning. A warning is also triggered when
the total set time has elapsed.
During the dive, if the dive time reaches half
the value of the set dive time and the warning
is set to either ViSuaL or BotH, Galileo
will show the message turn-around
tiMe on the display for 12 seconds. The
following figures show the actual display in
the various dive configurations (cLaSSic,
LiGHt and fuLL).