Maximum Depth; Cns O = 75 - Uwatec Galileo luna Mode D'emploi

2. Menus, settings and functions
2.6.1 Maximum depth (default: OFF)
Galileo allows you to specify a depth at
which a warning is activated. The warning
can be set in 1m/5ft increments.
During the dive, if you descend below the
set depth and the warning is set to either
ViSuaL or BotH, Galileo will show the
message MaX dePtH reacHed for
12 seconds in place of the no-stop or
decompression information.
In addition:
- For the cLaSSic configuration,
the value of the set depth is shown,
in inverted colors (white on a black
background), in the lower left corner.
Alternate information is still available
as described in section 3.3.2 but after
5 seconds the inverted set depth is
shown again. This will remain so for as
long as the diver stays deeper than the
set depth.
- For the LiGHt configuration, the current
depth is displayed in inverted colors
(white on a black background) and will
remain so until the diver ascends above
the set depth.
24
- For the fuLL configuration, the value
of the set depth replaces the max depth
indication and is shown in inverted
colors (white on a black background).
This will remain so until the diver
ascends above the set depth.
2.6.2 CNS O = 75% (default: OFF)
2
Galileo tracks your oxygen uptake during
the dive via the CNS O
monitored via the oxygen bar on the left
side of the screen (cLaSSic and fuLL
display configurations) and also via the
CNS O indication (cLaSSic, LiGHt and
2
fuLL). Galileo triggers an alarm when the
value reaches 100%; in addition you can
choose to have a warning triggered when
the CNS O clock reaches 75%.
2
During the dive, if the calculated CNS O
value reaches 75% and the warning is
set to either ViSuaL or BotH, Galileo
will show the message cnS o
clock. This can be
2
2
= 75%
2