Mb Level Reduced; L0 No-Stop Time = 2 Minutes When Diving An Mb Level - Uwatec Galileo luna Mode D'emploi

2. Menus, settings and functions
(white on a black background) until you
descend below the stop depth or until there
is an MB level reduction (see section 2.6.11
and 3.5.5). The following figures show the
actual display in the cLaSSic and fuLL
configurations.

2.6.11 MB level reduced

(default: BOTH)
When diving with an MB level higher than
L0 and in the presence of MB level stops,
if you ascend more than 1.5m/5ft above
the deepest required MB level stop, Galileo
reduces your MB level to the next possible
level. The display will show the new active
MB level. You can set Galileo to warn you
when this happens.
During the dive, if you ascend more than
1.5m/5ft above a suggested MB stop depth
and the warning is set to either ViSuaL
or BotH, Galileo will show the message
MB LeVeL reduced on the display for
30
12 seconds. In addition, regardless of the
setting of the warning, the new MB level is
displayed in inverted color (white on a black
background) as follows:
- cLaSSic: in the lower left corner after
the text message extinguishes. Alternate
information is accessible as described
in section 3.3.2, but after 5 seconds
the new MB level information is again
shown;
- fuLL: in place of the MB level.
The following figures show the actual display
in the cLaSSic and fuLL configurations.
2.6.12 L0 no-stop time = 2 minutes
when diving an MB level
When diving with an MB level higher than
L0, the underlying L0 information is not
directly visible on the display (though it is
accessible as alternate information). You
can choose to have Galileo warn you when
the underlying L0 no-stop time reaches
2 minutes while diving with an active MB
level higher than L0.