Chain Brake - GREENSTAR GS 6150 Mode D'emploi

English
F16
F17
WARNING
!
Continuing to use the product in anti-freeze
mode even when temperatures have risen
and returned to normal may result in the
engine failing to start properly or in the
engine failing to operate at its normal speed,
and for this reason you should always be
sure to return the unit to normal operating
mode if there is no danger of icing occurring.
When using the saw with the anti-freeze mode,
frequently check the screen and keep it clean of
saw dust.

CHAIN BRAKE

This machine is equipped with an automatic brake to
stop saw chain rotation upon occurrence of kickback
while in saw cutting operation. The brake is
automatically operated by inertial force which acts on
the weight fitted inside the front guard. This brake can
also be operated manually with the front guard turned
down to the guide bar.(F16)
To release brake, pull up the front guard toward the
front handle till"click"sound is head.
[Caution]
Be sure to confirm brake operation on the daily
inspection
How to confirm
(1)Turn off the engine.
(2)Holding the chain saw horizontally, release your
hand from the front handle, hit the tip of the guide bar
to a stump or a piece of wood, and confirm brake
operation. Operating level varies by bar size.(F17)
In case the brake is not effective, ask our dealer
inspection and repairing. The engine, If being dept
rotated to high speed with the brake engaged, heats
the clutch, causing a trouble, When the brake is
operated while in operation, immediately release
your fingers from the throttle lever and keep the
engine idling.
STOPPING ENGINGE
1.Release the throttle lever to allow the engine idling