Before Starting Engine - GREENSTAR GS 6150 Mode D'emploi

English
3.Things to notify your working area (Rope, warning signs)
4.Whistle (for collaboration or emergency)
5.Hatchet or saw (for removal of obstacles)
c. Never use the product when wearing pants with
loose cuffs, when wearing sandals, or when barefoot.
WORKING CONSIDERING HANDLING OF FUEL
a. The engine of this product is designed to run
on a mixed fuel which contains highly flammable
gasoline. Never store cans of fuel or refill
the fuel tank in any place where there is a boiler
stove, wood fire, electrical sparks, welding sparks,
or any other source of heat or fire which might ignite the fuel.
b. Smoking while operating the product or refilling its fuel tank is
extremely dangerous. Always be sure to keep lit cigarettes away from
the product at all times.
c. When refilling the tank always turn off the engine first and take a careful
look around to make sure that there are no sparks or open flames
anywhere nearby before refueling.
d. If any fuel spillage occurs during refueling, use a dry rag to wipe up
spills before turning the engine back on again.
e. after refueling, screw the fuel cap back tightly onto the fuel tank and
then carry the product to a spot 3 m or more away from where it was
refueled before turning on the engine.

BEFORE STARTING ENGINE

Check working place, the cutting object and cutting direction.
If there is obstacle, remove it.
Never start cutting until you have a clear work area, secure footing
and a planned retreat path from the falling tree.
Use caution and keep bystanders and animals out of the working area
whose diameter is 2.5 times of the cutting object.
Inspect the machine for worn, loose, or damaged parts. Never operate
the machine that is damaged, improperly adjusted, or is not completely
and securely assembled. Make sure that the saw chain stops moving
when the throttle control trigger is released.
WHEN STARTING THE ENGINE
Always hold the machine firmly with both hands when the engine is
running. Use a firm grip with thumb and fingers encircling the
handles.
Keep all parts of your body away from the machine when the engine
running.