Symbols On The Machine; Safety Precautions; Before Using The Machine - GREENSTAR GS 6150 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
WARNING
!
Never remodel the product. We won't warrant the machine, if you use the
remodeled product or you don't observe the proper usage written in the
manual.

3. SYMBOLS ON THE MACHINE

For safe operation and maintenance, symbols are carved in relief on the machine.
According to these indicafions, please be careful not to make a mistake.
(a).The port to refuel the "MIX GASOLINE"
Position: fuel tank cap
(b).The port to refuel the "CHAIN OIL"
Position: oil cap
(c).The indication regarding the switch. Flipping the engine
switch to the "O" (STOP) direction, the engine stops.
Position: rear-leftof the unit
(d).The indication regarding the choke.
Pulling out the choke knob, the choke closes.
Position: rear-right of the unit
(e).The indication regarding the chain oil adjuster nut.
"MIN" direction-the oil flow decrease
"MAX" direction-the oil flow increase
Position: bottom of the clutch side
(f).The position of H-needle
The position of L-needle
The position of idle adjusting screw
Position: rear-left of the unit

4. SAFETY PRECAUTIONS

BEFORE USING THE MACHINE

a. Read this owner's manual carefully to understand
how to operate this unit properly.
b. You should never use the product when under the influence
of alcohol, when suffering from exhaustion or lack of sleep,
when suffering from drowsiness as a result of having
taken cold medicine, or at any other time when a possibility
(a)
(b)
( c)
(d)
(e)
(f)

Publicité

Table des Matières
loading

Table des Matières