Installing Guide Bar And Saw Chain - GREENSTAR GS 6150 Mode D'emploi

English
Do not overreach or cut above shoulder height.
(5)
(6) Follow manufactures sharpening and maintenance
instructions for saw chain.
(7)
Only use replacement bars and chains specified by the
manufacturer or the equivalent.
MAINTENANCE
In order to maintain your product in proper working order,
perform the maintenance and checking operations
described in the manual at regular intervals.
Always be sure to turn off the engine before performing
and maintenance or checking procedures.
WARNING
!
The metallic parts reach high temperatures
immediately after stopping the enging.
Leave all maintenance other than the items listed in the
Owner's Manual to your competent servicing dealer.
TRANSPORTATION
Always carry the unit with the engine stopped, the
guide bar covered with the protector to the rare , and
muffler away from your body.
5. INSTALLING GUIDE BAR AND SAW
CHAIN
A standard saw unit package contains the items
as the items as illustrated.(F1)
(1) Power unit
(2) Bar protector
(3) Guide bar
(4) Chain saw
(5) Plug wrench
(6) Screwdriver for carburetor adjustment
(7) Spike and mounting screws
Open the box and instal the guide bar and the
saw chain on the power unit as follows: