TensCare Sports TENS 2 Mode D'emploi page 36

Operating:
Storage:
TYPE BF
EQUIPMENT
Note: The electrical specifications are nominal and subject to variation from the listed values
due to normal production tolerances of at least 5%.
Note: At least 30min required for the device to warm / cool from the minimum / maximum
storage temperature between uses until it is ready for intended use.
Temperature range: 5 to 40⁰C
Humidity: 15 to 93% RH non-condensing
Atmospheric pressure: 700 hPa to 1060 hPa
Temperature range: -25 to +70⁰C
Humidity: Up to 93% RH non-condensing
Atmospheric pressure: 700 hPa to 1060 hPa
Equipment providing a degree of protection against electric
shock, with isolated applied part.
This symbol on the unit means "Refer to Instructions for use".
This medical device is not water resistant and should be
protected from liquids.
Complies with EU WEEE regulations
35