Using The Unit - Stihl FSE 31 Notice D'emploi

English
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
Only use high-quality replacement parts
in order to avoid the risk of accidents
and damage to the machine. If you have
any questions in this respect, consult a
servicing dealer.
STIHL recommends the use of genuine
STIHL replacement parts. They are
specifically designed to match your
machine model and meet your
performance requirements.
Never attempt to modify your power tool
in any way since this will increase the
risk of personal injury.
Regularly check that the insulation of the
power cord and plug is in good condition
and shows no sign of ageing
(brittleness).
Electrical components, e.g. power cord,
may only be repaired or replaced by a
qualified electrician.
Clean plastic components with a cloth.
Do not use aggressive detergents. They
may damage the plastic.
Do not spray the machine with water.
Check tightness of mounting screws on
safety devices and the cutting
attachment and retighten if necessary.
Clean cooling air inlets in motor housing
as necessary.
Store the machine is a safe and dry
place.
26

Using the Unit

Mowing
2
1
Hold your trimmer with both hands –
N
right hand on the control handle (1)
– left hand on the assist handle (2).
Stand upright – hold the trimmer in a
N
relaxed position and always on right
side of your body.
Make sure the cutting attachment is
N
not touching the ground or any other
objects.
Swing the machine to and fro,
N
keeping the mowing head inclined
forwards at an angle of about 20° –
30°.
The cutting height is determined by
N
the distance of the mowing line from
the lawn surface.
Mow with the left-hand side
N
wherever possible; cuttings and
stones are thrown away from the
operator in this position.
Avoid contact with fences, walls,
N
rocks, etc. since it will result in a
higher rate of wear.
Mowing under Obstacles
The angle of the shaft and mowing head
can be adjusted for easier mowing under
hedges and bushes, see "Adjusting
Angle of Shaft".
Working with the Bumper (FSE 41
only)
1
The bumper (1)
– Limits the cutting range of the
mowing line.
– Reduces the risk of the rotating
mowing line causing damage (e.g.
tree bark).
– Maintains the correct ground
clearance when edging.
FSE 31, FSE 41