Front Brake Fluid Level Check - Askoll eSpro K1 Mode D'emploi

FRONT BRAKE FLUID LEVEL CHECK

The front brake fluid reservoir is equipped with an
inspection window to control the level in the tank.
If the brake fluid level is low or insufficient, DO NOT fill
the reservoir but check the brake pads and brake disc
for wear and any leaks in the brake circuit.
The brake fluid is hygroscopic, i.e. It absorbs moisture from the surrounding air. If
WARNING
the moisture in the fluid exceeds a certain value, the braking will be inefficient.
It is advisable to change the fluid every 2 years, never use brake fluid from partially
WARNING
used or open containers.
WARNING Check that only DOT4 brake fluid is used.
The brake circuit fluid has a high corrosive power. Do not allow it to come into
contact with skin or painted parts. In case of contact with the skin, wash with plenty
WARNING
of water.
eSpro K Rev03 - EN.indb 49 eSpro K Rev03 - EN.indb 49
ADJUSTMENTS AND PERIODIC MAINTENANCE
EN
EN
EN
EN
EN
49
17/11/2020 11:02:01 17/11/2020 11:02:01