Front Disc Brake - Askoll eSpro K1 Mode D'emploi

FRONT DISC BRAKE

The wear of disc and pads is automatically
compensated, therefore it has no effect on the operation
of the brake and does not require registration.
If there is excessive stroke and the lever is too close
to the grip when operating the brake, it could be due
to the presence of air in the circuit or to irregular
operation of the brake.
Effective braking action
approximately 1/3 of the brake lever stroke.
In case of brake malfunctions check brake pad wear, if thickness is reduced both are
WARNING
to be replaced at an authorized workshop.
After replacing the pads operate the brake lever several times to reposition them
WARNING
and bring the lever to the right position.
eSpro K Rev03 - EN.indb 45 eSpro K Rev03 - EN.indb 45
ADJUSTMENTS AND PERIODIC MAINTENANCE
eS K1/K2
pro
should begin after
EN
eS 70 K1
pro
EN
EN
EN
EN
45
17/11/2020 11:01:57 17/11/2020 11:01:57