Headlight Bulb Replacement - Askoll eSpro K1 Mode D'emploi

HEADLIGHT BULB REPLACEMENT

To replace the H8 35W bulb of the headlight, proceed
as follows: using the TORX T 20 key supplied as an
accessory and placed under the saddle, remove the
4 screws that fix the optical unit of the headlight and
separate it from the front mail basket,
then remove the 2 screws that fasten the lower cover
of the optical unit,
eSpro K Rev03 - EN.indb 51 eSpro K Rev03 - EN.indb 51
ADJUSTMENTS AND PERIODIC MAINTENANCE
EN
EN
EN
EN
EN
51
17/11/2020 11:02:03 17/11/2020 11:02:03