Front Brake Fluid Level Check - Askoll NGS1 Mode D'emploi

ADJUSTMENTS AND PERIODIC MAINTENANCE

FRONT BRAKE FLUID LEVEL CHECK

The front brake fluid reservoir is equipped with an
inspection window to control the level in the tank.
To check the fluid level the tank, it is possible to look
through the inspection window through the slot at the
front right of the handlebar cover.
If the brake fluid level is low or insufficient, DO NOT fill
the reservoir but check the brake pads and brake disc
for wear and any leaks in the brake circuit.
The brake fluid is hygroscopic, i.e. It absorbs moisture from the surrounding air. If
WARNING
the moisture in the fluid exceeds a certain value, the braking will be inefficient.
It is advisable to change the fluid every 2 years, never use brake fluid from partially
WARNING
used or open containers.
WARNING Check that only DOT4 brake fluid is used.
The brake circuit fluid has a high corrosive power. Do not allow it to come into
WARNING contact with skin or painted parts. In case of contact with the skin, wash with plenty
of water.
52
NGS_Rev00_EN.indb 52 NGS_Rev00_EN.indb 52 09/07/2020 17:09:14 09/07/2020 17:09:14