Prior To Use - Wolf M Serie Mode D'emploi

Oven Operation
Oven Operation

PRIOR TO USE

To ensure all residual oil from the manufacturing process
has been removed, each oven must go through the fol-
lowing procedure:
Clean the oven thoroughly with hot water and a mild
1
detergent. Rinse and dry with a soft cloth.
2 Turn on ventilation. Some smoke and odor is normal.
Touch or turn the knob to CONVECTION ROAST and
3
adjust the temperature to 500°F
Touch OFF (turn the knob for professional model) and
4
allow the oven to cool with the door closed.
PREHEAT
During preheat, the oven is heated as quickly and evenly
as possible and is not ideal for cooking. Preheat should be
used for all cooking modes except Broil, Warm, and some
modes in Gourmet. Once preheat is complete, a chime
indicates the oven has reached the set temperature.
for one hour.
(260°C)
CLOCK
The clock is visible on the control panel during all cook-
ing modes, however, the oven is shipped with the standby
power feature enabled which causes the screen to go
blank after five minutes of inactivity. To disable standby
power, refer to Extended Options on page 10. It is very
important the clock is set to the correct time if a timed
cook feature is used. The clock must be reset after a power
outage.
Setting clock:
Touch SETTINGS, then select TIME.
1
2 Touch 12 HOUR or 24 HOUR mode.
Use the slide bar to set the time of day, select AM or
3
PM, then touch SET. A chime indicates the clock has
been set.
Time can also be adjusted by touching the time display on
the home screen.
wolfappliance.com | 9