Oven Light - Wolf M Serie Mode D'emploi

Oven Operation
Clean
During clean, the oven is heated to an extremely high tem-
perature to burn off food soil. The oven lights are disabled.
Setting controls:
1 Touch QUICK START, then select CLEAN. For the pro-
fessional model, turn the selector knob to MORE, then
select CLEAN on the control panel.
2 Remove oven racks and rack guides, then touch OK.
Touch START.
3
4 Touch OFF to end the mode. For the professional
model, turn the selector knob to OFF.
5 The oven door locks and remains locked until the clean
cycle has ended and the oven temperature has cooled
below 550°F .
(290°C)
Porcelain is made from natural products and, therefore,
can chip or develop fine lines and cracks due to the expan-
sion and contraction that occurs as oven temperature
fluctuates (particularly when the self-cleaning function
is employed). This can result in cosmetic imperfections,
such as a cloudy, dull or scratched appearance. Cosmetic
imperfections may be more visible in a colored oven cavity.
CAUTION
During clean, exterior surfaces may get hotter than
usual. Children should be kept away.
16 | Wolf Customer Care 800.222.7820

Oven Light

WARNING
Verify power is disconnected from the electrical box
before replacing a light bulb.
Allow the oven to cool completely, then remove oven
racks and rack guides. To remove the light cover, gently pry
the bottom edge with a flat screwdriver. Remove the exist-
ing bulb and replace with a 40-watt halogen bulb. Refer to
the illustration below.
To replace the light bulb located on the top of the
oven cavity, contact Wolf Factory Certified Service. For
the name of the nearest Wolf Factory Certified Service,
check the Product Support section of our website,
wolfappliance.com, or call Wolf Customer Care at
800-222-7820.
LIGHT
COVER
Light bulb replacement