Handling And Operation; Insertion/Exchange Of The Micro-Sd Memory Card; Formatting The Micro Sd Memory Card - SilverCrest SHM 600 A1 Mode D'emploi

Handling and operation

Handling and operation
In this chapter you receive important information in regard to the
handling and operation of the appliance.

Insertion/exchange of the Micro-SD memory card

The appliance requires a Micro SD memory card (supplied) to be
able to scan and save documents or pictures.
♦ Switch the appliance off with the button /SCAN
♦ Insert the Micro SD memory card with the metal contacts facing
upwards into the slot
clicks into place.
IMPORTANT
► Do not press the Micro-SD memory card into the slot with force.
The appliance and the memory card could be damaged.

Formatting the Micro SD memory card

When using a new Micro SD memory card, this must be formatted
prior to scanning.
NOTICE
► Formatting erases all data saved on the Micro-SD memory card.
♦ Switch the appliance off with the button /SCAN
♦ Insert the Micro SD memory card with the metal contacts facing
upwards into the slot
clicks into place.
♦ Switch the appliance on with the button /SCAN
♦ Using a blunt and thin object, such as the end of a paper clip,
press the button FORMAT
♦ Press the button /SCAN
memory card. In the display
will blink until formatting is complete.
SHM 600 A1
and carefully press the card until it
and carefully press the card until it
. In the display
to start formatting the Micro-SD
the indicator for the SD card
.
.
.
appears a .
69
GB