Operating Elements; Handling And Use; Inserting Negatives - SilverCrest SND 3600 D3 Mode D'emploi

Operating elements

(For illustrations see fold-out pages)
PWR LED
1
SCAN button
2
Micro-USB socket
3
Slot for the negative holder or slide magazine
4
Negative holder
5
Slide magazine
6
Cleaning brush
7
USB cable (USB to micro-USB)
8

Handling and use

Inserting negatives

♦ Unlock the catch on the front of the negative holder
open the holder .
♦ Lay the negative in the holder the right way up . Ensure that holes
of the negative strip are placed on the corresponding retaining
tabs on the holder, so that the negative strip can not move .
♦ Close the holder until the lid clicks into place .
♦ Now insert the negative holder
the front and visible into the slot
♦ Push the negative holder
into the first position . For additional negatives, push the negative
holder
5
■ 36 │ GB │ IE
5
further in until it audibly clicks into the next position .
with the triangle marking at
5
on the right (see figure 1) .
4
into the slot
4
and
5
until it audibly clicks
SND 3600 D3