Device Operation; Turning The Device On And Off - Orthofix SpinalStim 5212CM Manuel D'instructions

Device Operation

Turning the Device On and Off

The SpinalStim device can be turned on by pressing the On/Off Button on
the Control Unit of the device until it beeps.
When the device is turned on, a status screen will display the number
of days since the first use, the treatment status, and the compliance
percentage.
The LCD will show the prescribed treatment time remaining and the
battery status.
The flashing colon on the LCD screen and On/Off button indicate that the
device is on and delivering treatment.
The SpinalStim device can be turned off by pressing and holding the On/
Off Button on the Control Unit of the device until it beeps.
The On/Off Button on the Control Unit doubles as a Backlight to light up
the LCD. In low light, press the On/Off Button to light up the LCD.
LCD Treatment Indicator
Control Unit
Charging Port
On/Off Button
3