Device Operation; Turning The Device On And Off - Orthofix Physio Stim 5302CE Manuel D'instructions

Device Operation

Turning the Device On and Off

The PhysioStim device can be turned on by pressing the On/Off Button on
the Control Unit of the device.
When the device is turned on, a status screen will display the number of
treated days since the first use, and the compliance percentage.
The LCD will show the prescribed treatment time remaining and the
battery status while treating.
The flashing colon on the LCD screen and On/Off button indicate that the
device is on and delivering treatment.
The PhysioStim device can be turned off by pressing and holding the On/
Off Button on the Control Unit of the device until it beeps.
The On/Off Button on the Control Unit doubles as a Backlight to light up
the LCD. In low light, press the On/Off Button to light up the LCD.
Charging
Port
LCD
Treatment
Indicator
Control Unit
3
On/Off
Button