EINHELL TE-MS 2112 L Mode D'emploi page 22

On/Off switch for laser
On/Off switch for LED lamp
Warning! To make miter cuts (with the saw head inclined or the turntable set at an angle), the adjustab-
le stop rail must be fi xed at an outer position.
To make 90° crosscuts, the adjustable stop rail must be fi xed at the inner position.
Anl_TE_MS_2112_L_SPK7.indb 22 Anl_TE_MS_2112_L_SPK7.indb 22
GB
- 22 -
22.06.15 12:43 22.06.15 12:43