Window Installation Kit - Beko BA309C Manuel De L'utilisateur

4 Installation
Parts

4.5 Window installation kit

Step one: Preparing the exhaust hose assembly
Press the exhaust hose into the window slider adaptor and unit adaptor, clamp automatically by
elastic buckles of the adaptors.
Step two: Install the exhaust hose assembly to the unit
Insert unit adaptor of the exhaust hose assembly into the lower groove of the air outlet of the unit
while the hook of the adaptor is aligned with the hole seat of the air outlet and slide down the exhaust
hose assembly along the arrow direction for installation.
Local air conditioner / Instruction Manual
Description
Power Cord Buckle
Security Bracket and Screw
Drain Hose
Drain Hose Adaptor (only for heat pump mode)
Foam Seal A (Adhesive)
Foam Seal B (Adhesive)
Foam Seal C (Non-adhesive)
Remote Controller and Battery
Exhaust hose
Press into
Press into
Window slider adaptor
Unit adaptor
Bolt
Exhaust hose assembly
Quantity
1 pc
1 pc
1 set
1 pc
1 pc
2 pc
2 pc
1 pc
1 set
27 / 276 EN