New lift FST-2XT Manuel De Montage page 139

Annex to the EU Type Examination Certificate
It is not mandatory that the specified types of "contactors for brake/valves" as well as
"zone magnet switches" be used. The type can be selected based on the reaction and de-
tection times of the "contactors for brake/valves" as well as the "zone magnet switches". If
types other than those specified above are used, verification of the reaction and detection
times is to be provided.
Shown on the following pages are the wiring diagram for rope-operated passenger and
freight lifts (figure 3), the wiring diagram for hydraulically operated lift systems with shutoff
valve as braking element (figure 4) as well as the wiring diagram for hydraulically operated
lift systems with redundant lowering valves as braking elements (figure 5).
Figure 3: Wiring diagram for rope-operated passenger and freight lifts
Figure 4: Wiring diagram for hydraulically operated lift systems with shutoff valve
as braking element
Manuel de montage et de mise en service FST-2XT FST-2XTs
No. EU-ESD 023 of 2016-10-04
139