Adjusting The Water Spray Intensity; Setting The Temperature Of Warm Air Dryer; Adjusting The Seat Temperature - DURAVIT Darling New 610001 Notice D'utilisation

Adjusting the water spray intensity

> Press the "Water spray intensity" button
The indicator light of the remote control illuminates.
> Press the "+" or "-" button
You can now set a suitable water spray intensity.
The water spray intensity can be set individually in 3 steps.
Low > Medium > High

Setting the temperature of warm air dryer

> Press the „Temperature" button
is at „Warm air dryer".
> Press the „+" or „-" button
You can now use the „+" or „-" buttons
dryer.
The temperature of warm air dryer can be individually adjusted in 4 stages.
Off > Low > Medium > High

Adjusting the seat temperature

> Press the "Temperature" button
is at "Seat temperature".
> Press the "+" or "-" button
You can now use the "+" or "-" buttons
The seat temperature can be individually adjusted in 4 levels.
Off > Low > Medium > High
11 on the remote control.
9 on the remote control.
10
on the remote control until the indicator light
9 on the remote control.
9
to set a suitable temperature of warm air
10
on the remote control until the indicator light
9 on the remote control.
9
to set the appropriate seat temperature.
EN
43