Adjust Water Spray Intensity; Adjust Water Temperature - DURAVIT SensoWash Starck f Lite 612001 01 1 04 1310 Notice D'utilisation

Adjust water spray intensity

Water spray intensity can be set individually to 3 different levels (low/medium/high).
Water spray intensity can be set for Rearwash and/or Ladywash functions
independently of each other via respective button.
1
> Press plus to
increase spray
intensity.
Adjust water spray intensity (Rearwash)
Adjust water spray intensity (Ladywash)

Adjust water temperature

Water temperature can be set individually to 4 different levels (off/low/medium/high).
1
> Press icon shown
to activate
setting mode.
If you choose level off, the water has the temperature of inlet water and the LEDs
are off.
2
> Press minus to
decrease spray
intensity.
2
> Press again to
adjust water
temperature.
3
> LEDs indicate
setting.
3
> LEDs indicate
setting.
4
+
3
0
+
+
2
1
+
> Setting cycle.
19
EN