Problem
The remote control
is not responding
reliably.
Rearwash/Ladywash
Switching between
the Rearwash and
Ladywash takes too
long.
Potential cause
The batteries are almost
flat.
The side of the remote
control where the signal
is sent or received is
obstructed with dust or
other objects.
The remote control is too
far away from the unit.
When switching between
Rearwash and Ladywash,
the spray wand moves
back and then forward
again after self-cleaning is
complete.
Solution
> Change the batteries.
> Remove the dust or objects.
> Use the remote control closer
to the unit.
This is normal.
EN
51