Emptying The Dust Tank; Cleaning The Dust Tank - LG Luv400T Manuel Du Propriétaire

Emptying the Dust Tank

WARNING
Electrical shock and personal injury hazard.
Always unplug power cord from electrical
outlet before performing any service on
vacuum cleaner. Failure to do so could result
in electrical shock or personal injury from
vacuum cleaner suddenly starting.
For maximum performance, always empty the dust
tank when the dirt level reaches the MAX line.
TO REMOVE DUST TANK, press the dust tank
release, tilt the dust tank back, then lift it out of the
vacuum cleaner.
TO EMPTY DUST TANK, press the Emptying dirt
release and open the bottom plate, as shown.
TO REINSTALL THE DUST TANK, place it in the
holder, then tilt forward until it clicks into place.
Make sure the dust tank is properly seated!
Don't touch the inner gear and button.
CARE & CLEANING

Cleaning the Dust Tank

For optimal performance, check filters regularly and
clean when necessary.
To Clean the Dust Tank:
1. Remove the dust tank from the vacuum cleaner.
2. Press the Emptying dirt release and open the
bottom plate.
3. Wipe out the dust tank with a soft cloth or paper
towel.
4. Release the latch on the Side door on both the
right and left sides.
5. Remove any hair, fibers or other debris from the
dust separator.
Do not remove the cones attached to the side
door for cleaning.
NEVER operate the vacuum cleaner with wet
filters or components!
17