Select Wash/Spin Speed - Hoover HAV-1 Guide D'utilisation

Using the Controls - 4 Speed Combo Models
Controls a t a glance
Dry er Exhaust tips
STEP 1
Select WATER LEVEL
Determine the selected setting based on clothes load
size. Selection should provide sufficient water to permit
clothes to circulate freely during agitation.
It may become necessary, due to bulky fabrics, to
adjust the water level after agitation begins. To adjust
the water level, turn the control to RESET and then
back to the desired setting.
WATER LEVEL SETTING
EX. LOW
SMALL
MEDIUM
LARGE
Note:
Items must circulate freely for best results.
STEP 2
Select EXTRA RINSE
When the switch is in the ON position, an additional
rinse at the end of the REGULAR/DELICATES cycle is
provided to more completely remove laundry additives,
suds, perfumes, etc.
5
Not es
LOAD SIZE
1/4 Full
1/4 – 1/2
1/2 – 3/4
3/4 – Full
(if desired)
STEP 3

Select WASH/SPIN SPEED

Your washer has selectable wash and spin speed
combinations.
WASH/SPIN
SPEEDS
Sturdy fabrics needing maximum
NORMAL/
water extraction.
NORMAL
Sturdy fabrics needing a slower
NORMAL/
spin speed because of wrinkling.
SLOW
Sturdy fabrics including cottons,
linens and normally soiled
SLOW/
NORMAL garments needing maximum water
extraction.
Delicate fabrics needing slower
SLOW/SLOW wash and spin speed because of
clothing construction.
LOAD TYPE