Pull Control Dial Out To Start - Hoover HAV-1 Guide D'utilisation

CYCLE TIME
14
10
REGULAR
6
2
12
WRINKLE-
FREE 8
CLOTHES
4
10
DELICATES 6
2
TEMPS

Pull Control Dial Out to Start

Hot/Cold
You may stop the washer at any time by simply
pushing the control dial in. Therefore it is possible to
obtain a non-agitated soak or to shorten, skip or
Warm/Cold
repeat any part of a cycle. The control dial must be
pushed in (off position) when you change the setting.
Warm/Cold
Cold/Cold
Warm/Cold
Cold/Cold
Control features vary by model.
STEP 5
Note:
Do not attempt to turn the control dial
counterclockwise. Damage to the timer will result.
4