With Stain Cleaner; Select Wash/Rinse Temperature; Select Cycle - Hoover HAV-1 Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

with Stain Cleaner

STEP
4

Select Wash/Rinse Temperature

Your washer gives you a choice of hot, warm or cold
water for washing and cold or warm water for rinsing.
Use the chart below as a guide.
WASH/RINSE
TEMPS
White and heavily soiled, color-fast
HOT/COLD
items.
Moderately soiled, colored items;
WARM/COLD
most wrinkle-free items.
Brightly colored, lightly soiled
COLD/COLD
items; washable woolens.
These settings feature STAIN CLEANER:
Hot/Hot/Cold
White and heavily soiled items.
Warm/Warm
Moderately soiled, colored items.
Warm
Note:
In wash water temperatures below 60
detergents do not dissolve well or clean well. Care labels
define cold water as up to 85
STEP
5

Select Cycle

To select a cycle, push the control dial in and turn it to
the right (clockwise) until the pointer is at the number
of minutes desired for the wash load.
LOAD TYPE
°
F (16° C),
°
F (29° C).
IMPORTANT: For optimum fabric care, the
appropriate wash and spin speed for the load type
must be selected using the WASH/SPIN Speed knob.
REGULAR/DELICATES Cycle
Regular/Delicates cycles share the same portion of the
control dial. For regular fabrics, select the cycle and
turn the Wash/Spin Speed dial to
NORMAL/NORMAL or SLOW/NORMAL. For
delicate loads, select SLOW/SLOW.
WRINKLE-FREE CLOTHES Cycle
This cycle provides up to 12 minutes of agitation.
Depending on the load, select either the
NORMAL/SLOW or SLOW/SLOW wash/spin speed.
STAIN CLEANER PLUS Cycle
Stain Cleaner provides approximately 30 minutes of
agitation and soaking to help remove stubborn dirt and
stains. For more information see page 8.
STEP
6
Pull Control Dial Out to Start
You may stop the washer at any time by simply
pushing the control dial in. Therefore it is possible to
obtain a non-agitated soak or to shorten, skip or
repeat any part of a cycle. The control dial must be
pushed in (off position) when you change the setting.
Note:
Do not attempt to turn the control dial
counterclockwise. Damage to the timer will result.
Control features vary by model.
6

Publicité

Table des Matières
loading

Table des Matières