Specifications Of Pcs38B; Warranty - Haussmann PCS38B 59595014 Manuel De L'utilisateur

SPECIFICATIONS
Model
Bore/Stroke(mm)
Displacement(CC)
Compression Rate
Rated Power
Max Torque
Maximum No-Load Speed
Idle Speed
Fuel Required
Lubrication Oil
Starting
Stopping
Power Transmission
Clutch Engagement Speed
Bar Length
Chain Pitch
Lubrication of Chain
Chain Oil Required
Fuel Tank Capacity
Oil Tank Capacity
Dry Weight
Thank you for investing in a HAUSSMANN power tool. These products have been made to demanding, high-quality
standards and are guaranteed for domestic use against manufacturing faults for a period of 36 months from the date
of purchase.
This guarantee does not affect your statutory rights. In case of any malfunction of your tool (failure, missing part, etc.),
please contact one of our service technicians at our toll free service line at 1-888-874-8661 from 8 AM to 6 PM,
Monday to Friday, Eastern time. RONA reserves the right to repair or replace the defective tool, at its discretion.
Normal wear and tear, including accessory wear, is not covered under guarantee. The product is guaranteed for 36
months if used for normal trade purposes. Any guarantee is invalid if the product has been overloaded or subject to
neglect, improper use or an attempted repair other than by an authorized agent. Heavy-duty, daily professional or hire
usage are not guaranteed. Due to continuous product improvement, we reserve the right to change the product
specification without prior notice.

SPECIFICATIONS OF PCS38B

PCS38B
40 / 30 mm
37.7 CC
8.6:1
1.45 KW / 8500 RPM
1.6 Nm / 8000 RPM
11,000 RPM
3100 ± 200 RPM
Mixed Fuel (gasoline and 2 cycle oil at 40:1)
Two-cycle Oil
Recoil Starter
Grounding
Automatic,Centrifugal Clutch
4200 RPM
14" (35.5 cm)
3/8" (10 mm)
Automatic Lubrication
Chain Oil
360 cc (12.2 fluid ounces)
420 cc (14.2 fluid ounces)
12.1 lbs (5.5 kg)

WARRANTY

41