Viatom Checkme Pro Manuel De L'utilisateur page 23

2. Tap the <ECG bandwidth> to change between <Normal> and <Wide>.
5.5 Setting the Application
1. In the Setting menu, choose <General>.
2. Choose <Application>, then choose between <Hospital> and <Home> mode.
3. Tap <Yes> to delete all data saved in another mode.
5.6 Erasing Data
1. In the Setting menu, choose <General>.
2. Tap <Erase All Data>, and then <Yes>.
All measurements saved in the device will be deleted.
5.7 Factory Reset
1. In the Setting menu, choose <General>.
2. Choose <Factory Reset>, then tap <Yes>.
All measurements, user information and other settings saved in the device will be
deleted, and the device will be restored to the factory default settings.
5.8 Enabling/Disabling Quick ECG
1. In the Settings menu, choose <General>.
2. Tap <Quick ECG> to enable or disable this function.
5.9 Changing Holter ECG Lead
To change the lead of ECG Holter for ECG Holter measurement:
1. In the Settings menu, choose <General>.
2. Tap <Holter Lead>, then choose among <LEAD II>, <CC5>,<CM5> and <User-
defined>
3. Tap <YES> to enable the change.
5.10 Enabling/Disabling Voice Guide
1. In the Settings menu, choose <General>.
2. Tap <Voice Guide> to enable or disable this function.
5.11 Changing Sound Volume
In the Settings menu, tap the <Volume> area to change volume directly. "X" means the
22