Viatom Checkme Pro Manuel De L'utilisateur page 18

3. Plug ECG cable and place eletrodes on the right postions as guided.
4. The display will show ECG waveform, press the button
recording will start to record 1 minutes later automatically with pressing the
button)
5. Wear the Holter Belt around your waist
6. Put Checkme in the pocket of the Belt, then close the pocket.
Keep recording for 24 hours or less. During this process, the device will beep if the
cable or any electrode is off.
4.6.3 Report on PC
Checkme Holter Browser is a PC software to check and print the report.
1. Connect device and PC by USB cable.
2. Operation on device:
Settings->To PC; or Review-> Holter icon->To PC icon
3. Operation on PC:
Open the software, press the button in the leftup corner to download the data
from device. Then you can check the report.
4.7 Wireless Monitor (Optional)
4.7.1
About Wireless Monitor
Simply placing the Checkme on patient's arm, the Wireless Monitor function is able to
continuously monitor and display patient's ECG, SpO
time waveform and readings can be sent and displayed on a mobile pad.
Warning and cautions advices

Before using this function, please read the Section 4.1.

To ensure better tracking of your health status, you should try to stay still during
the measurement.

The finger inserted in SpO sensor must be clean to ensure proper reading.
2
17
to start recording. (The
and systolic blood pressure. Real-
2