Daily Check - Viatom Checkme Pro Manuel De L'utilisateur

Patient sensitivity varies depending on medical status or skin condition. For
patients with poor peripheral blood circulation or sensitive skin, inspect the
sensor site more frequently.

4.2 Daily Check

About Daily Check
Warnings and Cautionary Advices
When using Daily Check, please ensure you select the right user. Wrong user will

result in incorrect blood pressure readings.
Before using the Daily Check function, you need to set the <Application> to <Home>
mode. Please refer to Section 5.5.
Daily Check measurement is a function that combines the measuring of ECG
(Electrocardiograph) waveform, HR (heart rate), Pleth waveform, SpO
oxygenation), PI (Pulse Index) and systolic blood pressure. It takes only 20 seconds to
collect your vital signs before giving you vital signs readings and your health evaluation.
Before using Daily Check measurement or reviewing the Daily Check data, ensure that
the correct user is selected. Please refer to Section 5.12 to know how to manage users.
Using Daily Check
To start a Daily Check, follow the steps as below.
1. If you have not created user, then please follow the instruction in Section 5.12 to
add your user account.
2. Press the Home button to enter the Main Screen.
3. Tap the <Daily Check> icon in the middle of the screen.
4. Choose the right user.
5. Hold the device according to the instruction, keep the device at the same level as
your heart, and keep stable posture and stay calm. Don't exert too much pressure
on the ECG electrode, which may result in EMG (electromyograph) interference.
Just hold gently and ensure good contact with the ECG electrode. Do not exert
pressure on the finger that put in the SpO
ensure good blood perfusion.
(4)
(1) Put the right forefinger into the built-in SpO
sensor. Just fit it inside but gently to
2
sensor. Use the finger nail to
2
9
(blood
2
(1)
(2)
(3)