Settings - Viatom Checkme Pro Manuel De L'utilisateur

1. Press the Home button to enter the Main Screen.
2. Tap the <Spot Check> icon in the middle of the screen.
3. Tap the "+" button.
4. Input the patient information. <Patient ID> must be inputted. Then tap
5. Choose which measurement(s) you want to perform by taping the icon(s) of ECG,
SpO and Temperature.
2
6. Perform measurement(s) according to the instructions. Please refer to
corresponding sections for the operation of each measurement.
7. When the measurement(s) is(are) finished, you will see the results.
8. Tap the
You can also select the patient(s) which you already added to take a Spot Check
measurement.
5.

Settings

5.1 Choosing Language
1. In the Settings menu, choose <General>.
2. Choose <Language>.
3. Choose the language from the list.
5.2 Setting Date & Time
1. In the Settings menu, choose <General>.
2. Choose <Date & Time>.
3. Tap "+" or "-" button to change the date, then tap
4. Tap "+" or "-" button to change the time.
5. Tap to finish the setting.
5.3 Changing ECG waveform length
To change the length of ECG waveform saved for each ECG Recorder measurement:
1. In the Settings menu, choose <General>.
2. Tap <ECG Length>, then choose among <30s>, <60s>.
3. Tap <OK> to enable the change.
5.4 Setting ECG Bandwidth
1. In the Setting menu, choose <General>.
button to add another patient for checking.
21
.
.