Viatom Checkme Pro Manuel De L'utilisateur page 16

Masquer les pouces Voir aussi pour Checkme Pro:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The device will monitor continuously, however no data will be saved until you
press the
6.
Press the
from left to right.
7.
When the bar is fully filled, the device will analysis your data, and then show the
measurement result.
Please refer to Section 2.4 to understand the result screen.
4.5 Temperature
About thermometer
Warnings and Cautionary Advices
The thermometer is only designed for the measuring area on the human body
stated in this manual.
The device needs to be in the room which the measurement is taken for at least
10 minutes before use.
Physical activity, increased perspiration on the forehead, taking vasoconstictive
medication and skin irritations can distort the result.
The forehead (temples) must be free from perspiration and cosmetics.
Taking the forehead temperature provides a current measurement of a person's
temperature. If you are uncertain about interpreting the results or if the values
are abnormal (e.g. fever), please consult your doctor. This also applies in the case
of slight temperature changes if there are other symptoms of illness such as
agitation, severe sweating, flushed skin, fast pulse rate, tendency to collapse, etc.
The temperature varies depending on the part of the body where the measurement is
taken. In a healthy person, the variance can be between 0.2 °C to 1.0 °C (0.4 °F to 1.8°F)
in different parts of the body. This device use infrared thermometer to measure forehead
temperature.
Influences on forehead temperature include but not limited to
A person's individual metabolism;
Age; Forehead temperature is higher in babies and infants than in adults. Greater
temperature fluctuations occur faster and more often in children. Normal
button.
button to start collecting your SpO
data. The countdown bar moves
2
15

Publicité

Table des Matières
loading

Table des Matières