Renfert lay:art crystal aqua xl Mode D'emploi page 8

2. Functional description of the case
When the lid is opened in a 90° angle it can
be easily removed from the case base.
Gently press the onto the base (1) and pull
the lid (2) upwards.
EN
At an angle of 115° there is a lid locking
position, which will hold the lid open in a
stable position.
Caution:
If this position is overstretched, the
hinges could become damaged.
3. Labelling foil
The non-permanent marker pen provid-
ed (7) can be used to write on the label-
ling foil (4). The foil can be removed from
the lid in order to exchange or inscribe
the label. Use the non-reflective side of
the foil to write on.
When replacing the foil, clip behind the
4 mounting points which can be found
on the lid. Firstly, bend the retaining flaps
towards the matt surface (a).
EN
1
a
4
7
- 2 -
2
90°
115°
Fig. 2
Fig. 3
Fig. 4