HemoCue Glucose 201+ Manuel De L'utilisateur page 51

Warranty
The analyzer carries a 24-month warranty from the day of receipt.
After the warranty period service/repair is carried out at fixed prices.
Service and Disposal
The analyzer should be cleaned as recommended under
Maintenance prior to service or disposal. Consult your local envi-
ronmental authorities for proper disposal.
Spare parts – Accessories
The following spare parts and accessories are available:
AC adapter
Battery Lid
Cuvette holder
PC program
Cables for PC and printer connection
Liquid controls
HemoCue Cleaners
Hard Carrying Case
HemoCue Lancets
Recommended separation distance between Portable
and mobile RF communications equipment and
®
HemoCue Glucose 201 + Analyzer
The HemoCue systems are intended for use in an electromagnetic
environment in which radiated RF disturbances are controlled.
The customer or the user of HemoCue systems can help prevent
electromagnetic interference by maintaining a minimum distance
between portable and RF communications equipment (transmit-
ters) and HemoCue systems as recommended below, according to
the maximum output power of the communications equipment.
Rated Separation distance according to fre-
maximum quency of transmitter (m)
output power
150 kHz
of transmitter
to 80 MHz
(W)
d=1.2√P
0.01 0.12
0.1 0.38
1 1.2
10 3.8
100 12
For transmitters rated at maximum output power not listed above,
the recommended separation distances (d) in meters (m) can be
estimated using the equation applicable to the frequency of the
transmitter, where (P) is the maximum output power rating of the
transmitter in watts (W) according to transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for
the higher frequencyrange applies.
NOTE 2 These guidelines may not apply in all situations. Elec-
tromagnetic propagation is affected by absorption and reflection
from structures, objects and people.
51
80 MHz to 800 MHz to
800 MHz 2.5 GHz
d=1.2√P d=2.3√P
0.12 0.23
0.38 0.73
1.2 2.3
3.8 7.3
12 23