Exit; Video Set Menu; Iris - Samsung SCC-641(P) Manuel D'instruction

EXIT

The EXIT menu is used to quit the CAMERA SET menu of the SCC-641(P) and return
to the MAIN MENU.
- QUIT: Ignores the changed information and restores the saved information.
- SAVE: Saves the information of the setting condition of the menu.
- PRESET: Ignores the changed information and restores the initial factory defaults
of the menu.
(CAMERA SET)
CAMERA ID
V-SYNC
ZOOM SPEED
MOTION DET
EXIT
3-8
OFF
INT
3
OFF
QUIT

VIDEO SET MENU

IRIS

The video output level of the monitor can be controlled by the IRIS lens depending on the
level of the incoming light.The video output level can be set in the ALC (Auto Light
Compensation) menu.The opening and shutting of the Iris lens can be set manually in
the MANU menu.
BLC
(Submenu of the ALC/MANU menu)
With conventional cameras, strong background lighting interferes with the clarity of
objects, making them appear dark. In the SCC-641(P), setting the BLC (Back Light
Compensation), submenu of ALC/MANU menu, will solve the problem of backlight and
give you a clear screen.
ALC
Choose the ALC of the IRIS item and press [ENTER] and set he submenu to the Video
Output level and BLC will be shown.The Video Output Level can be set in the level item
using the [Left, Right] keys.Set the BLC menu to ON and the Back Light Compensation
function will be applied to the screen areas of AREA menu.The screen area where Back
Light Compensation should be applied can be set with the PRESET or USER item.If the
AREA menu is set to PRESET, the backlight compensation function is applied to the
factory defaults of the SCC-641(P).If the AREA menu is set to USER and [ENTER] is
pressed, the user can select the applied area of the backlight compensation function.
(VIDEO SET)
IRIS ALC...
SHUTTER OFF
Press
AGC ON
WHITE BAL ATW
[Enter]
SPECIAL OFF
AUTO FOCUS AF
D-ZOOM OFF
EXIT QUIT
When the area is not blinking, you can use the [Left, Right, Up, Down] keys to move and
set the size. If you press [ENTER] when the area is not blinking, it will start to blink and
you can use the [Left, Right, Up, Down] key to set the position of the area. Use [ENTER]
and the [Left, Right, Up, Down] keys to set the position and size of the Motion Detection
Area. If you press [ENTER] once more, you will exit the "AREA" setting menu.
E
(ALC)
AREA PRESET...
BLC OFF
LEVEL (0) ---- I ----
RET
3-9