Controls - Winix NK305 Mode D'emploi

CONTROLS

Air Outlet Vent
Mode Button
- Press to cycle through manual fan speeds (Low, Medium, High, Turbo).
- Pressing will also cycle through Auto and Sleep Modes.
- When sleep mode is selected the Air Quality Indicator light will be turned off.
- Press and hold for at least 3 seconds to enable or disable PlasmaWave
Reset Button
After replacing a filter,
press the RESET button
for at least 5 seconds.
Light Sensor
Detects the
amount of
ambient light
within the
environment,
Power Button
to adjust the
Turns the unit
brightness
on or off.
of the LED
indicators.
English
Wi-Fi Indicator
Indicates whether Winix
Smart feature is enabled or
disabled.
Change Filter Indicator
LED light indicates when it is time to
change the filter.
Air Quality Indicator
Color-coded LED indicates
one of three levels of air
quality.
®
PlasmaWave Indicator
Indicates whether
®
PlasmaWave is enabled or
disabled.
Wi-Fi Button
Enables or disables
the Wi-Fi feature.
NK305
®
.
4