Honda EU26i Manuel De L'utilisateur page 51

7.Remove the sediment cup by turning it counterclockwise.
8.Clean the sediment cup, rubber gasket in nonflammable or high flash
point solvent.
9.Reassemble the rubber gasket, and sediment cup. Tighten securely.
10. Reinstall the air cleaner base, and connect the breather gas hose
with the air cleaner base.
11. Reinstall the paper element and air cleaner cover.
12.Close and latch the left side maintenance cover.
After installing the sediment cup, be sure to tighten it securely. Check
for fuel leaks and make sure the area is dry before starting the engine.
48
RUBBER GASKET
SEDIMENT CUP