Changing Oil - Honda EU26i Manuel De L'utilisateur

1.CHANGING OIL

Drain the oil while the engine is still warm to assure rapid and complete
draining.
1.Open and remove the oil maintenance cover.
2.Remove the oil filler cap and oil drain plug to drain the oil.
3.Install the oil drain plug, and tighten it securely.
4.Refill with the recommended oil (see page 16) and check the oil level.
5.Wipe off all the spilled oil from the generator.
6.Reinstall, close and latch the oil maintenance cover.
OIL DRAIN PLUG
UPPER LEVEL
OIL FILLER CAP
Wash your hands with soap and water after handling used oil.
NOTE:
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station for reclamation. Do not throw it in the trash or pour
it on the ground.
44